Testing, and repacking my own reserve

Everything regarding the safety of the sport, and ways to help reduce the risks. Discussions of how to setup and use reserve parachutes, flotation systems, and other safety related things
Post Reply
Primal Flight
Site Admin
Posts: 49
Joined: Wed Jul 24, 2019 5:31 pm

Testing, and repacking my own reserve

Post by Primal Flight » Thu Aug 15, 2019 11:41 pm

I tested out my reserve, to see how much distance it needs to open. Not the most scientific, but still usefull data.


One of the commenters suggested I re-pack it myself, so here I go. I plan on doing more tests after each re-pack, and when I am confident with it, then I may fly with it (or sell it, since I have another newer one)

(click on the pix to see them oriented correctly)

Step 1, airing it out.
20190813_203730.jpg
step 2, seperating the lines
20190815_192937.jpg
Step 3, folding it up
20190815_194235.jpg
Here are my results....I ran out of rubber bands, and it certainly doesn't look right. I will probably test it like this and compare it to the above video.
20190815_234044.jpg
You do not have the required permissions to view the files attached to this post.

User avatar
Ripmanridin
Posts: 1
Joined: Thu Aug 01, 2019 2:46 pm
Location: Sat. Bch.
Contact:

Re: Testing, and repacking my own reserve

Post by Ripmanridin » Tue Aug 20, 2019 8:49 am

Gonna have to try this. Do you know where I can get rubber bands?

Primal Flight
Site Admin
Posts: 49
Joined: Wed Jul 24, 2019 5:31 pm

Re: Testing, and repacking my own reserve

Post by Primal Flight » Thu Aug 22, 2019 12:29 pm

Ripmanridin wrote: Tue Aug 20, 2019 8:49 am Gonna have to try this. Do you know where I can get rubber bands?
Don't think they are special. was just going to get some from publix or office supply store.

but I will be 3D printing something to help. https://www.thingiverse.com/thing:2089699
I'll print you one too

Post Reply